抗剪切耐盐无机铝凝胶深部调剖剂研究
DOI:
作者:
作者单位:

作者简介:

王苹,女,硕士,从事油田化学方面的研究。联系电话:13145439953,E-mail:wp102517@163.com。

通讯作者:

基金项目:

国家自然科学基金“锆冻胶分散体的制备、表征及其在多孔介质中的运移规律的研究”(51174221),山东省杰出青年基金“提高采收率与采油化学”(JQ201013)。


Experimental study on shearing and salt tolerant deep profile control agents composed of inorganic aluminum gel
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    针对有机凝胶抗剪切性和耐盐性差的问题,采用无水氯化铝与活化剂尿素制备了一种抗剪切、耐盐的无机铝凝胶深部调剖剂。室内实验考察了质量浓度、温度、矿化度对铝凝胶胶凝时间的影响,并采用物理模拟实验从注入性能、封堵性能和耐冲刷性能3个方面对无机铝凝胶的应用性能进行了评价。研究结果表明:无机铝凝胶的胶凝时间为16~824 h,且可调,温度对无机铝凝胶的胶凝时间的影响较大,当温度小于80 ℃时,无机铝凝胶的热稳定性较好;矿化度(包括Na+,Mg2+和Ca2+)及剪切时间对无机铝凝胶的胶凝时间的影响较小,具有较高的耐盐、抗剪切能力;物理模拟实验结果表明,无机铝凝胶具有较好的注入性能、封堵性能和耐冲刷性能,封堵率在98%以上,能够满足80 ℃以下油藏深部调堵的需要。

    Abstract:

    Aiming at the problem of poor shear performance and salt tolerance of organogel, the deep anti-shearing and salt tolerant profile control agent is composed using anhydrous aluminum chloride and urea. The gelling behavior of the deep profile control agents is studied in this paper. The effects of concentration, temperature, and salinity on the gelling law are investigated. The application performances of the profile control agents, including the injectivity, plugging ability, and flushing resistance are evaluated. The results show that both the concentration and the temperature have great influence on the gelation time, and the gelation time can be adjusted from 16 to 824 h by adjusting the concentration of anhydrous aluminum chloride and urea. The inorganic salts including Na+,Mg2+,and Ca2+ have little effect on the gelation time. The salt tolerance, anti-shearing injectivity, plugging ability and flushing resistance of the gel system are very good, and the temperature limit is high as 80 ℃.

    参考文献
    相似文献
    引证文献
引用本文

王苹,戴彩丽,由庆,赵光,孟凡宾,袁小华.抗剪切耐盐无机铝凝胶深部调剖剂研究[J].油气地质与采收率,2013,20(6):100~103

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-09-02